Air cooler design
Thread Content
Now we need to prepare a quotation request for air coolers; there is a data sheet. What parameters are required so that the equipment manufacturer can determine the appropriate model? I only know that the heat load is 1500KW
The main parameters of the air cooler, such as its cooling area, efficiency, flow rate, temperature, and pressure, should be indicated in the table. For details, please refer to the attached table. Commodity No.: Number; Quantity: Amount; Service (Line No. or Equipment No.): Installation location; Connection: Inlet; Fluid: Medium; Pressure: Operating conditions; Temperature: Temperature; Pressure Design: Design conditions for pressure; Temperature: Temperature; Capacity: Maximum flow rate; Allowable Pressure Loss: Permissible pressure drop; Differential Pressure: Note1 (Pressure difference)
If the medium components are added as well, it will be more complete; additionally, it would be better if a floor plan showing the installation location could be included.
It is necessary to provide the flow rate of the medium, the required inlet and outlet temperatures, as well as the physical properties of the medium: specific heat, density, viscosity, and thermal conductivity. For commonly used mediums, it is possible to provide the name or components of the medium, so that the designers can look up the relevant information. Additionally, it is required to specify the location where the air cooler will be used (mainly to determine the ambient temperature in which the air cooler will operate)
The upstairs one has more of everything. Flow rate, medium, medium properties, location of use, local meteorological data, wind, humidity. For air coolers, weather has a significant impact. Coastal cities are different from inland cities.
The altitude is also required; higher altitudes can have an impact on the incoming air
I learned it! I was wondering whether it’s necessary to specify the material requirements for the equipment?
To eradicate your medium, it’s of course necessary to specify the material requirements for the base tube!
1. It is necessary to provide the parameters of the industrial fluid, including its flow rate and type – whether it is industrial soft water or air-conditioning water; a detailed list of the fluid’s components would be ideal, along with the inlet and outlet temperature parameters. 2. Local meteorological data (geographical location is sufficient; the person responsible for selection can consult the manual for more details). 3. Conditions at the installation site: whether it will be installed on the ground or on the roof (this is important to determine if the surrounding environment will affect airflow), as well as the area where it will be installed (to help decide what model and quantity are appropriate). 4. What are the user’s requirements regarding corrosion protection and anti-freezing measures? (Determine material)
It mainly involves process parameters such as the pressure, temperature, and composition of the working fluid. When designing, careful consideration must be given to the choice of flow rate, as it has a crucial impact on heat exchange performance: handshake
Learned something new – the answer above is correct :)
Flow rate, medium, medium properties, location of use, local weather data, wind, humidity, etc. are very important