What are the applications of steam jet pumps?
Thread Content
What are the advantages and disadvantages of steam jet pumps? Under what circumstances is it generally designed for use?
What I have seen is its use in combination with water ring vacuum pumps to achieve a high vacuum level; I have not seen it used elsewhere.
The greatest advantage of a steam jet pump is its ease of maintenance – it is practically ‘maintenance-free’. The downside is that it is highly affected by fluctuations in steam pressure. Used in vacuum distillation columns.
The greatest advantage of steam jet pumps is their low maintenance rate, but they have high requirements regarding the medium used, as it is necessary to protect the nozzles. The disadvantages are high energy consumption and stability that is greatly affected by fluctuations in the steam pressure from the external supply
Another point is that it has a high pumping capacity, making it very suitable for large vacuum systems. The best achievable vacuum level is 2 mmHg; to achieve a higher vacuum, it is necessary to change the pumping medium or use a mechanical pump instead
It is generally used in systems that generate high vacuums, such as vacuum distillation systems and phosphate concentration systems.
A few days ago, when I came across the flowchart provided by the owner, I encountered a steam jet pump for the first time; at that time I didn’t understand why. From the answers of the above-mentioned people, I understand a bit. Thank you!
Steam jet pumps are used in our chemical manufacturing facilities; some of them replace the fans used in startup cycles. They require little maintenance and do not need electricity as a driving force.
I had only heard of it before; I wasn’t clear about its principle or uses, so I learned from everyone else
The greatest advantage of a steam jet pump is its simplicity in starting up and shutting down, with almost no maintenance required. The downside is that the installation height requires to be relatively high due to the liquid seal. It is affected by large fluctuations in steam pressure, especially in winter. When a vacuum level of less than one atmosphere is required, a steam ejector is considered first. However, the corrosiveness of the medium and the cooling of the gas mixture after the pump must be taken into account (as it affects the level of vacuum).
Steam evacuators are used in most vacuuming applications, but they are inefficient and consume a large amount of steam. In the past two years, there have been many cases of using mechanical vacuum pumps as a replacement, with significant energy-saving effects, but high upfront costs.
A few days ago, I saw another factory use steam injection at level 4, and the results were good, but it required more steam.
We are an alcohol factory; we have two units here equipped with injectors, for liquid saccharification and triple-effect processes