Selection of pipe spring supports and hangers
Thread Content
Does anyone have any relevant information on the selection of pipe spring supports and hangers? Those with relevant experience could share their insights. Also, which manufacturers are considered to be the best?
The materials for the spring supports are all in print form; there is no electronic version. As for the manufacturers: we have been purchasing from a spring factory in Jiangyin. Springs in China are sold by weight, so one can imagine the quality
I’ll tell you the principles for selecting pipe supports and hangers: 1. When choosing pipe supports and hangers, it is necessary to select appropriate ones based on factors such as the magnitude and direction of the loads borne by the support points, the displacement of the pipes, the operating temperature, whether insulation or cooling is required, and the material of the pipes. 2. When designing pipe supports and hangers, standard pipe clamps, pipe supports, and pipe hangers should be used whenever possible. There are 6 more points; let me know if you need them and I’ll write them down for you
Thank you so much; we really need experience in this area. The temperature difference in our reactor reaches 400 degrees, so supports are necessary for the feed pipes
Refer to the \"Piping in Chemical Plants\" manual, page 154; the chapter on pipe racks provides a more detailed description