What are the equipment specifications of an ammonia synthesis tower for 500,000 tons of ammonia synthesis? ? ?
Thread Content
A 500,000-ton ammonia synthesis plant is to be constructed, but there are no drawings yet? I would like to ask you about the main equipment and specifications for ammonia synthesis? ? ? Thank you:handshake :handshake :handshake :L This post was last edited by mingyyan on 2009-1-10 15:25 ]
Please heroes, please tell me a few, thank you very much:handshake:handshake:handshake
Main equipment for 500,000 tons of ammonia synthesis: synthesis tower, condenser, testing equipment, instrumentation, water treatment equipment, automated control system, compressor, heat exchanger drawings, please contact the design institute
Owner, how can we not have blueprints for 500,000 yuan of synthetic ammonia? The main equipment of the synthesis workshop includes synthesis tower, waste boiler, steam superheater, heat exchanger, ammonia condenser, ammonia separator, ammonia collector, ammonia tank, circulating gas compressor, and ammonia compressor. Is the landlord the construction company? If the construction is not possible without drawings, ask the owner for the drawings first, and then start work after you have the drawings.
The original poster’s drawings are a thick book! Better find someone to design it. No matter how many comments you give, can they cover the content of a book?
Safety tips: Tencent reminds you to be wary of "QQ winnings"” * * . Xu Peng 11:18:28 Synthetic ammonia uses carbon ammonia as the main raw material. The complete set of synthetic ammonia generation projects has a scale of 4×104 tons/year, 6×104 tons/year, 10×104 tons/year, and 30×104 tons/year. Its product quality is in line with China’s * * Standard. 1. Process route: The common process of generating synthetic ammonia using anthracite as raw material is: gas generation -> semi-water gas desulfurization -> compressor section 1, 2 -> conversion -> conversion gas desulfurization -> compressor section 3 -> desulfurization -> compressor section 4, 5 -> copper washing -> compressor section 6 -> ammonia synthesis -> product NH3. When methanation is used to desulfurize and remove CO. CO2 in the raw gas, the synthetic ammonia process flow chart is as follows: Gas production->Semi-water gas desulfurization->Compressor section 1 and 2->Conversion->Switch gas desulfurization-> Compressor section 3->Decarbonization->Fine desulfurization->Methanation->Compressor section 4, 5, 6->Ammonia synthesis->Product NH3 2. Technical indicators: (1) Raw coal: Anthracite: Particle size 15-25mm or 25-100mm Fixed 75% steam: Pressure 0.4MPa, 1-3MPa (2) Product: Synthetic ammonia: Ammonia content (99.8%) Residue content (0.2%) 3. Consumption quota: (calculated based on 4×104 tons/year) (1) Anthracite (into the furnace): 1,300kg (2) Electricity: 1,000KWH (carbonization process), 1,300KWH (decarbonization process) (3) Circulating water: 100M3 (4) Area: 29,000M2 4. Main equipment: (1) Gas generator (2) Compressor (3) Copper washing (4) Synthesis tower