Φi5260 dry absorption tower tubular acid separator drawings
Thread Content
The dry absorption tower in our plant’s old sulfuric acid system uses a tube-type acid separator; it is of the double-tube type. We once sent people to our plant’s documentation room to look for the relevant drawings, but they were not found there. Colleagues who have the above drawings please upload them; the inner diameter of the dry suction tower is 5260 mm. Last edited by in the blink of an eye on 2008-1-1 20:44]
There is an assembly diagram of a dry absorption tower with a diameter of 3500, which can be used as a reference. If needed, give me an email
Thank you! It’s available on this forum with a diameter of 3500.
What material would you like to use? There are significant differences between the old style and the current one; it is recommended to get it from the manufacturer. You can set requirements based on the main dimensions of the tower, such as height difference, acid distribution amount, spraying density, and acid distribution point density. Material requirements.