Please tell me about the principle of QJQ6 type vibrator
Thread Content
I bought a QJQ6 type vibrator. When I put it on, it vibrates sometimes. I don’t know which one.* * Anyone who knows the structure of this kind of thing better, or whether there are any requirements for the vibrator itself during installation!
QJQ6 type vibrator (impact type) 1. Features: 1. Continuously generate shock waves. 2. The frequency is adjustable. 3. Can start and stop working instantly 2. Structure and principle of action: Open the two-position three-way solenoid valve (normally open, normally closed), high-pressure gas P pushes the piston up, and the gas in the upper chamber of the piston is discharged through the exhaust port. When the piston moves up to the upper end, the vent hole 6 opens. At this time, it is automatically exchanged. The high-pressure gas enters the upper chamber of the piston through the air channel 8. The piston moves downward, and all the gas in the lower chamber of the piston is discharged from the exhaust port. At the end under the piston, the first cycle ends, and the second cycle begins. The continuous reciprocating motion causes the piston head to impact the silo, generating an impact load. 3. Main uses: For some raw materials with high moisture content, water will not be precipitated due to impact vibration, and mixed raw materials will not be separated again due to impact vibration. Raw materials with low specific gravity will not vibrate. See the address below for details: http://www.yantaitlpc.com/qjq6.htm