Commissioned design for cyclone separator
Thread Content
Our company needs to design a cyclone separator with a pressure of 1.0 MPA and a temperature of 200 degrees; the medium used is gas. The inlet for the gas should be square in shape, with dimensions of 1300X450. The inlet should be positioned starting from the edge of the equipment, meaning that the 1300 mm side will be welded to the equipment. Is it possible to design one? If you would like to have it designed, please contact me; I will add in any other size requirements. Thank you!
Square? It’s still this big; with a pressure of 10 kilograms, it’ll probably be quite thick, :Q
Excuse me, is there anyone who specializes in stress analysis and design? Contact me.
Is the poster offering a reward for a design? The difficulty with this device lies at the connection between the take over and the cylinder; a conventional design combined with stress analysis is sufficient to address this issue. For stress analysis design, several points need to be taken; the market price is 30,000 to 50,000 yuan per point. How much money can your company allocate for this?
Reply: Our company’s facility also used a similar cyclone separator at the beginning of 2007, under basically the same conditions. As in the previous collaboration, design can be provided. It can also be processed for use in equipment.
The weather has been getting colder these days; some of the refractory materials here have cracked, and some of the refractory materials and linings have fallen off
You can contact me: handshake
Is it solved? If it’s not resolved, contact us at QQ965461031 for production
Wuxi Petrochemical Machinery Factory specializes in the production of cyclones; CNPC’s cyclone testing equipment is manufactured by this company.
Wuxi Petrochemical Equipment Co., Ltd. I conducted experiments on that experimental setup there