Oil emulsification in the reflux tank at the top of the coking tower
Thread Content
Let’s discuss the causes and treatment measures of oil emulsification in the reflux tank at the top of the coking tower, okay?
The emulsification of the oil at the top of the coking tower should be caused by the water in the oil. However, water and water vapor are inevitably injected during the coking process, so this problem cannot be solved by removing water and can only be solved by adding a demulsifier. If the oil in your device is seriously emulsified, it is very likely that the amount of demulsifier added is insufficient and the quality is poor. It is recommended to increase the injection amount. If the problem still cannot be solved by increasing the injection amount, it is better to use the newer variety AE7502, which is better in dehydration effect and is obviously better than other demulsifiers.
Thank you for your answer, very good and helpful.