Mellapark ripple packing issues
Thread Content
I have a question: when using Mellapark corrugated plates, the F factor determined by the production conditions is 0.6. However, the specifications sheet for Mellapark corrugated fillers lists the maximum value of F factor; for example, the maximum F factor for 125X is 3.5, and the minimum value for other types is 2.0. How should I make my choice? ? ? ?
The F factor, also known as the gas kinetic energy factor, is primarily related to column resistance and flooding. The maximum value of factor F is the value beyond which flooding will occur. Therefore, the actual F factor should be as small as possible, indicating a lower pressure drop in the tower being used.
Great question, I’m also learning * right now :)
The maximum factor F is the gas kinetic energy factor corresponding to the critical flow velocity; the lower its value, the smaller the pressure drop. One of the main criteria for selecting a packing material is the pressure drop, with lower values being preferable.
The maximum factor F is the gas kinetic energy factor corresponding to the critical flow velocity; the lower its value, the smaller the pressure drop. One of the main criteria for selecting a packing material is the pressure drop, with lower values being preferable.