Wear-resistant pipeline
Thread Content
In the Texaco water-coal slurry gasification process, the ash water treatment process requires many wear-resistant pipes; generally, enamel-coated wear-resistant pipes are used. Could you recommend some manufacturers and also tell me about their service life?
Haven’t heard of it; it’s the first time I’m hearing about it
I haven’t heard of it either; usually carbon steel pipes are used. Which design institute designed the gasification system for the original poster’s home? However, I think the main obstacle to doing this is the issue of thermal expansion. I wonder what your thoughts are on this?
It seems that no one chooses enamel-resistant pipes; generally, carbon steel pipes with corrosion margin are selected
Our factory uses cast iron pipes with ceramic linings; the manufacturer seems to be based in Shandong. I’ll check that for you! Generally, the areas where bends are present are the most prone to wear and tear. Therefore, our factory has changed the pipes at those bend locations from those welded together to pipes connected using flanges; the sections are joined together with flanges. When the pipes become worn out, they can be replaced directly, which takes only about 1 hour. This approach prevents severe fluctuations in the graywater system, as well as eliminating the need for extensive welding work by maintenance personnel
Wear-resistant pipes should be made of cast stone; even better is silicon carbide material.
There are now several manufacturers of wear-resistant cement linings that produce wear-resistant pipe fittings, and the results are quite good; these manufacturers can be found in Hebei and Shandong
Composite pipes made of high-chromium cast iron and carbon steel can be considered; they perform very well in the mineral processing industry.