Can pressure vessels be repaired?
Thread Content
The jacket of one of our company’s reaction vessels is broken. Can we replace the jacket and continue using it? If possible, what needs to be done?
The container can definitely be repaired, but it’s necessary to be practical – consider the condition of the container. If it’s severely corroded or damaged after years of use, and its strength and other parameters no longer meet the required standards, then it’s better to discard it.
It can certainly be repaired, but according to the regulations, it must be done by a qualified entity, usually the manufacturer of pressure vessels. Related procedures such as notification and supervision inspections also need to be carried out.
It can be repaired, but it must be handed over to a unit qualified for the repair of pressure vessels, who will prepare records, a plan, and conduct calculations regarding the vessel’s strength.
Personally, I think it’s fine, but you’d better check the relevant regulations – pressure vessels aren’t something to take lightly
It can be repaired! Specific measures: 1. Contact the original equipment manufacturer (listed on the equipment nameplate) ； 1) First, find out the cause of the jacket damage ； 2) Is it within its designed service life? (If, within the designed service life, the design and manufacturing party is liable!) ) 3) The repair plan is prepared by the manufacturer. 2. If it is manufactured by another factory, that factory must possess design and manufacturing qualifications of the appropriate level. 3. Finally, a quality certificate must be issued.
Agree with what was said on floor 6! Very professional!
It can be repaired; just hold it and see how to fix it
In such cases, it is recommended to conduct a thorough inspection before deciding whether to carry out repairs. Factors such as thinning, deformation, and corrosion of the inner walls should all be taken into consideration; if repairs are to be done, they should be carried out by a manufacturer with the appropriate qualifications.
The 6th floor’s opinion is excellent; I agree with what they said. It can be repaired, but it needs to be sent to a qualified pressure vessel manufacturing factory that has the necessary expertise. After testing, it can be determined whether repair is possible. If repair is to take place, there must also be design drawings, signed off by the design agency with an official stamp. Haha
It can be repaired, but definitely not by you yourselves; that would be a different matter if you had the necessary qualifications
It can be repaired, but it must be done by a qualified unit; furthermore, if it is a category three container, it also needs to be reported to the boiler inspection authority
I agree with the view from the sixth floor; the jacket can be repaired. First, find out the reason why the jacket cannot be used ； Let’s take a look at the degree of corrosion in other areas as well. As mentioned on the sixth floor, if it is still within its service life, then find a company qualified to design and manufacture pressure vessels to redesign the jacket for your reactor, install it, and then conduct pressure testing.
Of course it can be repaired; otherwise, those who do maintenance work would starve to death