Welding process of 14mm16MnR product welding test plate
Thread Content
Let’s talk about the welding process parameters of your company’s 14mm thick 16MnR product welding test plate - the value that can be achieved after several times of welding with wire and flux - 20 degrees impact
The 14mm thick plate must be welded by front and back automatic welding. After beveling, it will be unqualified at -20 degrees. If the influence of welding process parameters is not considered, flux used at -40 degree level can be used. Welding wire: H10Mn2; flux: SJ101 3 times ； current: 550-650A voltage: 32-36V