Structure and features of the Nemo pump

Thread Content

Structure and features of the Nemo pump: Structure of the Nemo pump: 1. Motor (reduced-speed motor)； 2. Direct connection bracket ； 3. Drive shaft ； 4. Inlet ； 5. Coupling shaft ； 6. Joint ； 7. Stator ； 8. Rotor ； 9. Discharge port. Features of the Nemo pump: 1. The spiral seal line formed by the contact between the stator and the rotor completely separates the suction chamber from the discharge chamber (pressure chamber), giving the pump a valve-like function for isolation. 2. It enables the multiphase transportation of liquids, gases, and solids. 3. It has a higher lifting capacity compared to other types of pumps (up to 8.5 meters). 4. The volume of the fluid inside the pump does not change during flow, with no turbulence, agitation, or pulsation. 5. The volume cavity formed by the elastic stator can effectively reduce wear when transporting media containing solid particles. 6. The viscosity of the conveyed medium can reach 50,000 mPas, with a solid content of up to 40%. 7. Flow rate is proportional to rotational speed; flow rate can be adjusted by using a governor. 8. It can achieve constant pressure control and protection against dry operation.