Calculate wall thickness
Thread Content
It is necessary to design a storage tank with DN3000, high H6000, working pressure PN1.6MPa, normal temperature, and is used to hold sulfuric acid. Want to calculate wall thickness?
How to design without calculation? This question is a bit confusing ;P
Like you, I just started designing. Depending on the conditions, the container you are designing should be a type of container. The container should be calculated to see if the wall thickness meets the requirements. We should pay more attention to the standards.
My friend upstairs, this container is definitely not of the same type. There should be no need to classify it. It needs to be calculated. How can you know its thickness without calculation?
Doesn’t 1.6MPa sulfuric acid storage tank need to be classified? This is the first time I heard it, and I don’t think anyone has rated it. well
Sulfuric acid at room temperature is liquid and should have a wall thickness similar to that of the outer wall. Radiography is still required.
How can the working pressure of a 6-meter tank containing liquid sulfuric acid reach 1.6MPa? What other gas is there?