Provide a water treatment design problem.
Thread Content
Suppose a wastewater treatment plant is to be designed with a daily processing capacity of 3,000 tons. The parameters of the incoming wastewater are as follows: oil content of 10 mg/l, impurities at 1,000, and other parameters are to be determined based on standard values. The available area for this plant is 10,000 square meters. It is requested that a wastewater treatment system be designed that can meet the specified requirements, along with information regarding the required land area and an estimated total investment cost. This is purely for interest development. There are responses with plans and encouragement.
There’s no specific plan; I just have filters – various types of liquid filters. If there are any issues related to filters in the plan, you can turn to me; I guarantee to share all the information I know. Hehe
If you work in water treatment, please provide more details on the inlet water parameters. If I weren’t in the water treatment business, I wouldn’t have anything to say!