Precautions during the stirring of acrylonitrile polymerization solution
Thread Content
Acrylonitrile polymerization solution also falls under the category of downstream products of methanol. Are there any special considerations during the mixing process, such as the choice of mixing equipment or any specific requirements? Thank you
Acrylonitrile polymerization solution does not belong to the downstream products of methanol; care must be taken to prevent explosions during polymerization, and nitrogen should be used to remove all oxygen.
Thank you. Since my graduation project involved equipment for stirring acrylonitrile polymerization solutions, after researching the physical properties of acrylonitrile, I had many other questions. First, the role of stirring in the acrylonitrile polymerization mixture. Second, in the reactor containing the acrylonitrile polymerization mixture, with jacket water and an acrylonitrile temperature of 65 degrees Celsius, could volatility increase at this temperature? Third, material selection. Acrylonitrile is corrosive; are there any special considerations regarding the treatment of materials or the inner walls of reactors? Thank you