I have a question regarding the secondary brine processing section
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 23:36. I have a reference flowchart for the secondary brine system; apart from going to the electrolyzer, the outlet of the secondary salt water pump also has a pipe with no flow, and I’m not sure where this pipe is connected to ? ? # ， ， &
It must be the pipeline for saltwater circulation; at the beginning of operation, the saltwater circulates within containers such as the saltwater filtration tank and the ultra-pure saltwater tank
Is it possible that substandard brine returns to the primary brine for further filtration? The circulation during operation seems logical to me; thank you for your guidance.
The outlet distribution panel for the secondary refined salt water pump is generally as follows: 1. Pipeline to the upper tank； Salt water pipeline once every 2 cycles ； 3. Circulation pipeline back to the refined brine tank (pH monitoring is generally carried out on this pipeline) ； 4. Go to the brine high-level tank (early electrolyzers used high-level tanks for emergency shutdown purposes)
Well, thanks for the advice. I learned a bit more about pH level testing.
It’s usually for reflux, used after stopping the vehicle or before starting it
It’s probably the pipeline leading back to V1402! It was used during the initial small-cycle operation of the system when it first started running