Is there any example of combining hysys with DCS?
Thread Content
Is there any example of combining hysys with DCS?
Hysys needs to be connected to DCS when processing real-time optimization and OTS. Generally, the OPC software of the DCS manufacturer is the C/S method of communication. For specific information, please refer to relevant information, such as HYSYS RTO+, OTS, etc. You can also communicate with me.
Because our production process now uses the delta V system, it may be necessary for the system to communicate with hysys during simulation, so I would like to see what steps generally need to be completed when establishing communication? Thanks
Okay, I'll take a look at the document recommended upstairs first. If you have any questions, be sure to communicate with the person upstairs slowly. Thanks.
HYSYS is connected to DCS. The poster should be talking about OTS use, right? As far as I know, the previous engineering practices of Aspentech and the current engineering practices of Honeywell did not really connect HYSYS with DCS, but through third-party software. AspenTech used to use MUSIC (Multi User Simulation Configuration) method to communicate HYSYS data with DCS data. As far as I know, Aspen's engineering practice in China is the OTS project of 7 sets of units of CSPC, which adopts this method (two sets of polymers were developed using OTTISS). Honeywell is currently also establishing communication between HYSYS (called unisim Design in Honeywell) and DCS through the original Shadow Plant software under the UOS framework. Hope it helps.