Energy and Water Conservation Section?
Thread Content
Currently, petrochemical industry regulations require that energy and water conservation sections be included in research reports. I’m not sure how to write them specifically; I would be very grateful if experts could offer some help.
It is the “Energy Use Evaluation Report,” which is similar to an environmental impact assessment report; the “Energy Audit Report” can be used as a reference”
Thank you for the reply from above; it refers to water conservation and energy savings in the feasibility study report. So how should water conservation be described? Especially regarding the application of water conservation technologies, could you help me with that? Thank you. This post was last edited by lipingzhangzhlp on 2008-2-15 at 13:47
Feasibility studies and environmental impact assessments both cover these two aspects; there are also specialized energy-saving analysis reports. Such reports generally outline the measures that have been adopted, as well as advanced manufacturing processes, etc., and indicate by how much energy and water can be saved. It’s more of a formality than anything substantive!
1 Project Overview 1.1 General Introduction to the Project 1.2 Project Name, Organizing Entity, Nature of the Enterprise, and Legal Representative 1.3 Product Plan and Production Scale 2 Design Basis and Principles 2.1 Design Basis and Specifications 2.2 Design Principles 3 Comprehensive Energy Consumption Indicators 3.1 Energy Savings Calculations 3.2 Energy Savings Metrics 4 Energy and Water Conservation Measures 4.1 Energy-saving Measures in the Manufacturing Process 4.2 Energy-saving Measures for Water Supply and Drainage 4.3 Comprehensive Utilization of Energy throughout the Plant 4.4 Energy-saving Measures for Power Supply 4.5 Energy-saving Measures in Building Design 5 Emission Reduction Measures 5.1 Control of Exhaust Gas Emissions 5.2 Control of Wastewater Emissions 6 Conclusions
This is the table of contents for the energy-saving section; the content should be filled in according to the specifics of the project.
This is really troublesome; it doesn’t specify that everything should be written in a unified format. Even though you say something needs to be done, nothing concrete is actually carried out
I have the same problem; could some expert help me out?