On the use of gaskets for corrosive media

2008-02-16View Original

Thread Content

Some suggestions regarding the use of gaskets in corrosive media: 1. When in use on-site, it should be applied according to the properties of the corrosive medium; the specifications for gaskets must not be substituted with lower-grade ones, as this may lead to a shortened service life and subsequent leakage accidents. 2. When gaskets are used on-site, full gaskets should be used at manholes and blind flanges to reduce the risk of accidental corrosion. (Liner defects cause leakage and corrosion, as well as the presence of other substances in the material) 3. The thickness of the gasket is increased appropriately to compensate for the poor sealing caused by compression and uneven end surfaces. This post was last edited by ydb9217 on 2008-2-16 21:11]

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

On the use of gaskets for corrosive media

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links