Which flow meter to choose for light diesel?
Thread Content
No. 0 light diesel, normal temperature, gauge pressure 0.36MPa. What flow meter do you think is best? What about vortex flowmeter?
Depends on what you use it for. If it is measurement, I think you should choose orifice plate or turbine. If it is trade settlement, I suggest you choose Rosemount mass flowmeter, which has the highest accuracy.
If it is trade settlement, use EMERSON's mass flow meter.
It is not for trade, just use orifice plates for the intermediate links.
It is recommended to use Rosemount mass flowmeter
The cost of a mass flow meter is too high! It is recommended that you choose a volumetric flow meter, which is more suitable. It is often used for trade settlement! The price is also more moderate!
Use gear flowmeter, high accuracy and cheap price
Depending on the specific situation, if the process requires measuring the moisture content, the volumetric type can be used. The volumetric type measures the volumetric flow rate, but the mass of the liquid is generally measured in trade. Therefore, it is necessary to perform temperature and pressure compensation on the analyzer to obtain the compensated density, which can be multiplied by the volumetric flow rate. If water content analysis is not considered, use a mass flow meter, Emerson Micro Motion 0.1.
Just use a turbine or oval gear, which is economical and practical.
How much does a general volumetric flow meter cost?