Key operating points for backwash filters
Thread Content
Key operating points for backwash filters
This topic is a bit strange, and there’s no content either. . . .
Does the poster want information or is trying to share information? Please clarify
The title says “Seek help”; consult the product instructions or contact the manufacturer. The key operating points need to be combined with specific usage scenarios to be explained more effectively.
Control temperature, control pressure, control speed, control medium, ensure timing!
It’s better to consult the manufacturer about this issue! They will provide a more detailed explanation!
What medium is used for backwashing? ? ?
Is it a filter for gases or liquids?
Regarding the automatic backwash filters used in process circulating water systems, the key points for operation are: ensuring an adequate water supply volume to facilitate backwashing, and paying attention to the adjustment of the water seal system. If it is an intelligent fully automatic backwash filter installed at the pump outlet, then it is necessary to control the pressure, flow rate, and waste discharge, among other things. Automatic backwash filters are also used in wastewater treatment processes. Therefore, it is recommended that the original poster clarify the scope of use or the purpose
The key is to set an appropriate backwash time and specify a certain pressure value; backwashing begins once that pressure value is reached
When backwashing, attention must be paid to controlling the flushing pressure and volume; too high a pressure can wash out all the filler material. If an AIR BUBBLE is set in advance, it is important to wait for a certain period of time after setting the AIR BUBBLE before proceeding with washing; otherwise, the filling material, which has not yet settled, will also be washed away.