Thread Content
The metal rotor flow meter is a type of area meter; it operates on the principle of using a float for measurement. It is one of the most commonly used flow meters in industry. Made entirely of metal, this type of flow meter is particularly suitable for use in complex and harsh environments, and it can be used to measure the flow rate of media under various conditions. It features high precision, a wide range of applications, a simple structure, and easy installation. Key points to consider when selecting metal rotor flowmeters: 1. Suitable for measuring low-flow rates of gases, liquids, and steam in small diameters; resistant to high temperatures, up to 450℃ ； 2. Affected by a certain viscosity, it is not suitable for measuring high-viscosity media; when the flow rate exceeds 1003/h, the pressure loss is high ； 3. Mostly used in instruments for process control; the desired accuracy is 1%, with a typical value of 1.5%, and the range ratio is 10:1 ； 4. There are various options available, including local pointer type, battery-powered type, two-wire type, and 220V AC powered type ； 5. It is not suitable for measuring media with large density variations, nor for measuring the flow rate of pulsating media. The above are the key points to keep in mind when selecting metal rotor flowmeters. For more information, please visit the company’s official website at http://www.yb1518.com/. Please keep this link when reproducing the content! http://www.yb1518.com/UploadFiles/2015113152723891.jpg