Thread Content
Single-flange level transmitters are suitable for the continuous measurement of the liquid level in various tanks and containers used in industrial production processes. Suitable for the continuous monitoring of liquid level, material level, oil-water interface, and foam interface in industries such as metallurgy, chemicals, environmental protection, power plants, papermaking, pharmaceuticals, printing and dyeing, food processing, and municipal services. It features a simple structure ； Easy to install ； Advantages such as easy adjustment. This article mainly introduces the relevant technical specifications of single-flange level transmitters. I. Measurement accuracy: Class 0.5, Class 1, Class 1.5 ； Pressure range: negative pressure, normal pressure, high pressure (below 32 MPa) ； II. Measured medium temperature: -50～240℃ ； Operating environment temperature: -20～75℃ ； III. Applicable media: acids, bases, salts, or any medium that does not corrode polytetrafluoroethylene ； IV. Output signal: 4-20mA, two-wire system ； Power supply: Load resistance 0-750Ω DC24V ； V. Fixing method: Threaded installation M20×1.5, M27×2; Flanged installation DN15, DN25, DN50, DN80 ； VI. On-site display: analog display from 0-100%, digital display, on-site display. The above are the several technical specifications of single-flange level transmitters summarized by Jiangsu Evergrande Instruments for everyone. It is hoped that through this article, you will gain a new understanding of flange-type level transmitters. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/UploadFiles/2012112613433280.jpg