Thread Content
Wastewater flow meters are among the instruments that are relatively difficult to use, and choosing one of them is also challenging. This difficulty stems not only from the strong corrosiveness and complexity of the wastewater being measured, but also from the wide variety of such meters available, such as electromagnetic and throttling type wastewater flow meters, as well as integrated wastewater flow meters. Given how complicated the selection process is, what aspects should we pay attention to when making a choice? First, we need to have a thorough understanding of the wastewater in question. Before purchasing a wastewater flow meter, it’s important to know what type of industrial wastewater is involved – this can include wastewater from power plants, steel mills, chemical plants, paper mills, or domestic sources. Different types of wastewater require different flow meters; for example, paper mills need flow meters specifically designed for paper mill wastewater. It is also necessary to have a thorough, detailed, and comprehensive understanding of the components in the wastewater, in order to select the appropriate lining and electrode materials for the wastewater flow meter. For example, the corrosiveness of the wastewater, and the amount of particles and debris it contains. If we are not very familiar with the composition of wastewater, we can determine its corrosiveness by analyzing the material of the wastewater pipes. Then, a corrosion-resistant sewage flow meter is selected based on the degree of corrosivity. II. Thoroughly understand the installation conditions The on-site environment in which the sewage flow meter is to be installed also directly influences the choice of such meter. It is also necessary to fully understand the preceding straight pipe section, on-site interference conditions, etc. This is because different sewage flowmeters have varying requirements regarding the environment. For example, the installation of electromagnetic flowmeters requires a certain length of straight pipe ahead of it, as well as the absence of strong interference signals at the installation site; in addition, the temperature and humidity levels there must also meet certain requirements. III. Understanding the performance of flow meters When selecting a certain type of flow meter, it is necessary to have a thorough understanding of its various performance characteristics. One should be familiar with factors such as the accuracy, repeatability, linearity, range ratio, and output signal properties of that particular sewage flow meter. It is also necessary to know the diameter of the sewage pipes, as different flow meters have different requirements. For example, each diameter of electromagnetic flowmeters has certain requirements regarding the minimum flow rate; when the flow rate is too low, the measurement accuracy will not correspond to the actual value. When the flow rate is too low, we generally reduce the diameter of the pipe to meet the measurement requirements of the sewage flow meter. The flow rate of wastewater varies greatly, and its composition is difficult to determine; it contains not only various impurities but also various elements. Wastewater also has a certain degree of conductivity and corrosiveness. This imposes very strict requirements on the various performance characteristics of sewage flow meters; therefore, when making a choice, we should consider the specific circumstances, as well as the environment and the nature of the sewage, in order to select the most suitable sewage flow meter. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/uploadfiles/image/2011-4//2011412108214556.jpg