Which domestic manufacturer produces the best 2 million kcal/chiller units?
Thread Content
Recently, our company plans to install an ammonia-based refrigeration compressor system with a high cooling capacity, commonly referred to as a chiller. The required cooling capacity is 2 million kcal/h. Which domestic manufacturer is known for producing such high-capacity chiller systems? Thank you!
Shenmu has done a good job; you can consult Shenmu’s sales department.
Go and take a look at Shaanxi Blower; Kobe Steel in Japan is also good, and we are using it currently
Products from manufacturers of ice machines or refrigerators are of better quality; Dalian Ice Mountain Group and Yantai Binglun Co., Ltd. are recommended.
For ice machine units, Dalian Ice Mountain Group is recommended.
The screw-type open-compressor models currently in use in our company, as well as the piston compressors that we plan to order, are all manufactured by Dalian Iceberg Group’s refrigeration equipment; however, it is said that Yantai Binglun’s products are also of good quality. I support what was said on the fifth floor.
Products from manufacturers that specialize in ice machines or refrigerators are generally of better quality. I recommend those made by Wu Leng; the JJZ2KALG31.5 model from Dalian Ice Mountain Group is of poor quality. I’m not very familiar with the products offered by Yantai Binglun Co., Ltd
Reply to 1# chinazwr: The domestic market is currently in a state of severe downturn; Wu Leng and Da Leng have already merged, and then there’s Yantai Binglun.
For machines requiring a cooling capacity of 2 million kcal/h, screw refrigerators are sufficient; centrifugal compressors are not needed. The five 2 million kcal/h machines currently in use by our company are from Dalian Cold, part of a complete Wuhan Cold system, and are performing well. It has been in use for over two years without any major failures, though the motor uses 10KV-1000KW motors with sliding bearings.