Thread Content
Level gauges are frequently used in industrial production and measurement tasks. There are several types of level gauges, such as magnetic flap level gauges, radar level gauges, ultrasonic level gauges, and float level gauges. Among these, magnetic flap level gauges are among the most commonly used and widely applied measurement devices. When using magnetic flap level gauges, there are many precautions that need to be understood and kept in mind. Below, Jiangsu Hengda Instrument Co., Ltd. will provide you with a brief introduction to these aspects. When using a magnetic flap level gauge, it is essential to maintain strict control over its accuracy; the precision range of this device is around 10 millimeters, which corresponds to the distance between two magnetic flaps. During use, it is important to check whether the medium being measured is corrosive, as corrosive media have a certain degree of volatility, and this can cause corrosion to the sensors in the device as well as damage to its components. Over time, such conditions can lead to irreversible damage to the device. When using a magnetic flap level gauge, there should be no magnetic objects in its vicinity. It is absolutely forbidden to use metal wires to secure the level gauge, as such items can severely disrupt its proper operation and lead to inaccurate measurement results. Magnetic objects cannot be used; copper pipes can be used as a substitute. Copper pipes are non-magnetic materials. Before using the device, it must be installed in accordance with the specifications – the level gauge must be kept in a horizontal and vertical position – and a calibration magnet must be used to ensure that the ball below the zero mark turns red. A valve also needs to be installed between the magnetic flap level gauge and the container’s piping; this is done so that in the event of a malfunction, repairs can be carried out promptly, as well as necessary cleaning and maintenance. There are also requirements for the medium; it must not contain solid impurities or magnetic materials, as solid impurities can clog the equipment’s components. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/uploadfiles/image/2010-11//201011191011384084.jpg