Thread Content
When using orifice plate flow meters, dirt always accumulates, and over time this dirt can affect the proper functioning of the orifice plate flow meter. Today, the editor of orifice plate flowmeters will explain to you how to clean orifice plate flowmeters. A orifice plate flow meter consists of a primary element (the orifice element) and secondary components (a differential pressure transmitter and a flow display unit). The throttling device is made up of the orifice element, pressure tapping devices, connection flanges, and measurement tubes. Throttling elements: standard orifice plates, standard nozzles, long-diameter nozzles, 1/4 circular orifice plates, dual orifice plates, eccentric orifice plates, notched orifice plates, conical inlet orifice plates, etc. Pressure tapping device: annular chamber, pressure tapping flange, clamping ring, pressure guide tube, etc. Connection flanges (**standard, various standards, and flanges from other design departments), fasteners. Principle and characteristics of the measuring tube: The fluid filling the pipe flows through the orifice flow meter located within the pipe; this causes a local contraction near the throttling element, resulting in an increase in flow velocity and a difference in static pressure on the upstream and downstream sides. The spray gun is marked with scale indicators at certain positions inside the flow meter body. It can not only reduce and remove all ethylene glycol and grease-based contaminants and residues adhering to the inner surfaces of the machine, but also capture these contaminants and residues under sealed circuit conditions. The technician coming to the cleanup site to carry out this work is part of the general contracting approach, so no other client is required. The online cleaning method for orifice plate flowmeters has the following advantages: it eliminates the need to prepare related equipment, hire skilled plumbers, and bear the high costs associated with complex operation procedures ； By getting rid of the traditional method of using rotating grindstone scraping equipment, the previously costly cleaning processes were eliminated, and the accuracy of flow meter measurements was improved ； It reduces the downtime required for cleaning the flow meter, allowing it to be put back into use quickly ； All the waste liquids collected can be ultimately treated within a closed-loop system. For more information, please visit the company’s official website at http://www.yb1518.com/. Please keep this link when reproducing the content! http://www.yb1518.com/UploadFiles/2012118173632146.jpg