Thread Content
Turbine flow meters are mainly used to measure clean liquids and have the characteristics of high precision, compactness, and easy installation and maintenance. The following factors should be considered when selecting: 1. Precision The precision of any product can be high or low, and the same applies to turbine flow meters, so you must take this into consideration when using it. If you do not have very high precision requirements during use, you can choose a relatively low precision one, but For some high-precision conditions, great precision must be ensured, such as product trading, energy measurement, etc. If it is used in this case, its precision must be guaranteed, because these uses are large, and if the precision is not high, there will be a slight difference. 2. Look at the measurement medium. Turbine flowmeters can measure many kinds of media. It is precisely because of this that it is very different. If the same flowmeter is used for different media, the data obtained will naturally be very different. Therefore, the corresponding flowmeter must be selected according to different media. Third, depending on the caliber, the full capacity of the turbine flowmeter is different, and the data obtained are also different. Therefore, we must also pay attention to pertinence in this regard to ensure that the caliber and flow rate match. For more information, please visit the company’s official website http://www.yb1518.com/. Please keep this link when reprinting! http://www.yb1518.com/UploadFiles/20101111113351160.jpg