Thread Content
In simple terms, an integrated orifice plate flow meter is a differential pressure flow measurement device with a high range ratio; it is a combination of a standard orifice plate and a differential pressure transmitter. Integrated orifice plate flow meters can be used to measure the flow rate of various gases, and they are employed in various petrochemical industries. The working principle of a orifice plate flow meter is to fill the entire pipeline with gas, then cause a local contraction through a throttling element to increase the flow velocity and create a pressure difference on both sides. In this way, the relationship between pressure difference and flow rate can be calculated based on the relevant parameters, allowing for an accurate determination of the gas flow rate. Integrated orifice plate flowmeters have the following characteristics during installation: First, due to their simple structure, they do not require complicated installation procedures. They are durable, offer reliable performance, and are inexpensive, making them a highly cost-effective product. Second, orifice plates are manufactured in accordance with international standards, allowing them to be used in many industries. Moreover, their design is simple; they can be connected directly to differential pressure transmitters without the need for pressure tapping tubes. During installation, it is necessary to ensure that the tube is filled with liquid; it can be installed horizontally or at an angle. When in use, it is important to ensure that there is no bending in the straight section at the back, and that the orifice plate remains clean with no deposits present. When installing the pressure transfer lines, it is essential to follow the standards strictly. For more information, please visit the company’s official website at http://www.yb1518.com/. Please keep this link when reproducing the content! http://www.yb1518.com/UploadFiles/2012118173632146.jpg