Ask for advice from domestic suppliers of large storage tank steel plates

Do you want a supplier of storage tanks or a supplier of steel plates for storage tanks?

Need a domestic supplier of carbon steel or stainless steel plates? We commonly use domestic suppliers of stainless steel plates - Baosteel, Taigang, Anshan Iron and Steel, and Wuyang Steel Plant:)

Baosteel has the most stable performance, followed by Anshan Iron and Steel, Wuhan Iron and Steel, Wuyang Steel Plant, and recently Nanjing Iron and Steel Co., Ltd.

For example, 9Ni steel for low-temperature LNG storage tanks can only be made from foreign companies, and this technology does not exist in China.

Baosteel, Anshan Iron and Steel, and Wuhan Iron and Steel are all available.

What the poster probably wants to ask about is the steel plate used for the construction of large storage tanks with a yield strength of 490MPa. The current situation is as follows: 1. There are steel plants that can produce: Baosteel, Wuhan Iron and Steel, Anshan Iron and Steel, Wuyang, Nangang, Jinan Iron and Steel. 2. In terms of equipment level, Baosteel and Anshan Iron and Steel are better, and Wuyang is also good. It is the earliest production base of wide and thick plates in China. Nangang is a steckel rolling mill, and Wuhan Iron and Steel is mainly limited to plate width. If Egang is put into production, it should change, and Jinan Iron and Steel's production line can also meet the requirements. 3. From a physical perspective, Baosteel is slightly higher than other steel plants in plate shape and intrinsic quality, but with a few exceptions, the difference between the other steel plants is not too big. 4. These steel plants have already achieved practical application results. From the perspective of application, Baosteel and Wuhan Iron and Steel have more applications. 5. From the perspective of basic research on steel plates, Baosteel and Wuhan Iron and Steel are at the forefront. Wuhan Iron and Steel was the earliest in development and contributed a lot to it. Baosteel's research is more comprehensive and solid. 6. The compositions of the above-mentioned steel mills are slightly different, so please pay attention when using them. Notice: The application of this type of steel is not very simple. I have experienced the application of most products, and this is my deepest experience.

Just to add: 9Ni steel has been successfully developed in China and can be produced by Taiyuan Iron & Steel Co., Ltd. It has passed the review of the Compliance Committee. I have seen their materials and they are still acceptable. It is said that they will be used in engineering projects soon. In fact, domestic materials must be promoted and given opportunities, otherwise they will never progress.

This post was last edited by yakui on 2009-8-10 20:02. It’s 10W square, so big. I have never done this before. I hope that the author will post pictures of the production process and completed pictures in the future. :lol :lol

Large domestic steel mills will have no problem as long as they produce this material. This was not possible in the mid-1980s because the steelmaking capacity was insufficient at that time. * * In order to produce more steel, the smelting volume is increased, causing serious segregation of steel. Now that the capabilities have increased, the technology has advanced, continuous rolling is available, and the rolling mills are either Japanese or West German, so there is no problem.

I have used 100,000 large cans of high-strength steel from Baosteel!