Thread Content
Electromagnetic flowmeters have very high requirements regarding their installation environment; they consist of two key components: the sensor and the converter. Sensors and converters also have different requirements regarding their installation environment. Last time, we discussed the selection of the installation environment for sensors; this time, we will look at the requirements that electromagnetic flowmeters have regarding their converter’s installation environment. As an on-site instrument for field indication, the converter of an electromagnetic flowmeter has the following requirements regarding its installation environment: 1. The location where the electromagnetic flowmeter converter is installed should be one free from strong vibrations. 2. There should be no corrosive gases in the area surrounding the converter. 3. The ambient temperature around the location where the converter is installed should be between -10 and 45°C. 4. The relative humidity of the air at that location should be 85% ； 5. The converter of the electromagnetic flowmeter should preferably be installed indoors. If it is outdoors, measures such as protection from rain and sunlight should be taken. When setting up an electromagnetic flowmeter, it is necessary to pay attention not only to the choice of the installation environment but also to the selection of the environment for the sensor and converter of the electromagnetic flowmeter. When choosing a converter for the electromagnetic flowmeter, the above 5 requirements can be used as a guide for the setup, thereby ensuring that the chosen environment is most suitable for installing the electromagnetic flowmeter. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/UploadFiles/2012717174126829.jpg