Thread Content
There are many reasons that can cause the shutdown of air compressors and cold dryers in Hefei. Five of the more common ones are listed below. Shutdown due to high-pressure protection is a frequent fault that occurs in screw air compressors and cold dryers; there are various reasons for this shutdown, and the editor specializing in air compressors in Hefei (0615) has identified five of the most common ones. 1) Ambient temperature above 40℃ ； Check whether the exhaust temperature of the air compressor is too high, and whether the after-treatment system of the air compressor provides effective cooling to ensure that the compressed air meets the requirements set by the cold dryer. 2) The on-site operating environment of the unit is not well-ventilated ； Improve the ambient temperature in the air compressor room and ensure good ventilation. 3) There is a lot of dust and debris at the installation site, which has clogged the radiator ； Remove the panels of the cold dryer and blow out the dust from the radiator. 4) The exhaust volume of the air machine does not match ； Adjust the high-voltage protection data. 5) The condensate water in the system is not drained in a timely manner ； Adjust the frequency of automatic drainage according to the actual situation, or extend the drainage time; it is also possible to manually drain all the water. If the cold dryer of an air compressor experiences a shutdown fault, it is necessary to start by understanding its working principle, take into account the specific symptoms of the fault, and apply appropriate corrective measures to resolve it. For more related information, please visit: Hefei (0615) Air Compressor http://www.hfysjlm.com/