Thread Content
An electromagnetic flowmeter is a flow meter that operates based on Faraday’s law of electromagnetic induction, featuring high precision, reliability, and a long service life. It consists of a sensor that comes into direct contact with the fluid in the pipeline, along with a signal converter at the upper end. Since it is based on the principle of electromagnetic induction, it has certain requirements regarding the conductivity of the liquid medium being measured; generally, it can only be used to measure the flow rate of conductive liquids with a conductivity greater than 5 μs/cm. It is a device for measuring the flow rate of conductive media. Before purchasing an electromagnetic flowmeter and installing it in use, it is necessary to connect the flowmeter to the pipeline. There are various methods for making this connection: Flange connection: This is a relatively traditional method. The electromagnetic flowmeter has flanges at both ends that can be used for connection. To connect it to the pipeline, simply fix the flanges at both ends to the corresponding flanges on the pipeline using bolts. This type of connection allows for one-way installation. Sensors with this type of connection are relatively small in size and are suitable only for use in small pipes. Clamping connection: This is a more advanced method of connection; electromagnetic flowmeters that do not come equipped with flanges use this type of connection, allowing them to be clamped between the two flanges of the pipeline using bolts. It is a relatively simple method of connection. It is necessary for us to know the installation method of electromagnetic flowmeters, so that no mistakes will occur when making the clamping connections. Threaded connection: Some low-diameter electromagnetic flowmeters use a threaded connection; this type of connection is commonly employed in the medical and food industries. Otherwise, this kind of connection also has certain applications in the oil industry and exploration. Clean connection: Nowadays, this type of connection is used for some small-diameter pipes. We often refer to the clean connection as a clamp-type connection as well. With this type of connection, it is possible to quickly install and remove electromagnetic flowmeters, and it is also convenient for regular cleaning and maintenance. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/UploadFiles/2012717174126829.jpg