Thread Content
The top-mounted magnetic flap level meter is directly installed on the top of the container. The floating ball moves up and down along with the liquid level (or interface) to drive the magnetic connecting rod to move up and down. The magnetic steel in the magnetic connecting rod uses the magnetic coupling principle to drive the magnetic flap indicator. The liquid level or interface level in the process container is clearly and intuitively indicated with red and blue colors (liquid red, air blue), and it can be transmitted over long distances and realize automatic control. HD-UHZ series top-mounted magnetic flap level gauge is mainly composed of body part, local indicator, remote transmitter and upper and lower limit alarms. 1. When the magnetic flip plate liquid level gauge is put into operation, the upper valve should be opened first, and then the lower valve should be opened slowly to prevent the pressurized medium in the container from flowing into the pipe body rapidly, causing the float to rise rapidly, causing the tracking indicator to fail or the float to be damaged due to impact. 2. Before leaving the factory, all components of the magnetic flap liquid level gauge have been tested for internal and external pressure respectively according to the standards. There is no need to test the pressure after installation. When the container and the liquid level gauge are connected, the float should be taken out for the internal pressure test and put back in when it is put into operation. 3. During use, if a single flip column of the magnetic flip plate liquid level meter cannot be flipped due to sudden changes in liquid level or other reasons, you can use a calibration magnet (accessory) or a float to calibrate it. For more information, please visit the company’s official website http://www.yb1518.com/. Please keep this link when reprinting! http://www.yb1518.com/UploadFiles/201385152424176.jpg