Thread Content
Flow meters are used to measure the flow rate of fluids; they can be used to measure gases, liquids, and steam. Depending on different requirements, rotameters, electromagnetic flowmeters, vortex flowmeters, orifice plate flowmeters, and so on have been developed. Each type of flow meter has its own set of usage requirements, and different flow meters are installed in different ways. This article provides a brief introduction to the different connections of flow meters. I. Flange connection: Flange connection is likely the most common type of connection. Whether it is a glass rotor flow meter, a metal tube rotor flow meter, an electromagnetic flow meter, or an vortex flow meter, it is sufficient to secure the flanges at both ends with bolts to those on the pipeline. II. Threaded connection: Some flow meters also use a threaded connection; glass rotor flow meters, metal rotor flow meters, and turbine flow meters all employ this type of connection. III. Clamping connection: This method of connection is relatively advanced; it is used by some flowmeters that do not have flanges, and it allows the device to be clamped between the two sides of the pipeline using bolts. This connection method is relatively simple. Many vortex flowmeters use this type of connection. IV. Clean-type clamp connection: This type of connection is used today for pipes with small diameters and low operating pressures. With this connection method, flow meters can be installed and removed quickly, and their daily cleaning and maintenance are also very convenient. A liquid uniformly rich in a liquid-solid two-phase suspension, such as sludge, pulp, paper pulp, etc. V. Other types: there are still many other kinds of connectors available. On some small flow meters, there are bayonet connections, funnel joint rubber tube connections, quick-connect connections, quick-thread connections, and so on. There are many ways to connect flow meters, and when selecting a flow meter, the manufacturer should ask the customer, who must provide clear information. Specify the dimensions, specifications, and standards of the connection method. There are differences in dimensions among products of different specifications and standards. Proper provision is required for correct installation. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/UploadFiles/20101111113351160.jpg