Thread Content
Keywords: SMC connectors. When using http://www.08amy.com/SMC connectors, it is necessary to analyze their characteristics as well as the application environment in order to ensure their quality. At this point, it is required to test parameters such as pressure, speed, temperature, and torque of the connectors, as well as conduct tests on the wear of the sealing elements; the results of these tests must be recorded. 1. Measure the pressure at the SMC joint, as well as the relationship between pressure and rotational speed: At a constant temperature, by changing the rotational speed of the SMC joint, it can be seen that as the speed increases, the pressure exerted decreases. Thus, the temperature, rotational speed, and pressure of the rotary joint are in balance with one another. Of course, the rotational speed and the pressure-bearing capacity change depending on the circumstances, and each set of data obtained needs to be analyzed in order to determine the values at which these three factors are in balance. 2. Relationship between torque and shaft length: The power required to operate an SMC joint is torque, which is related to the length and weight of the shaft. One end of the shaft is connected to the power source, and by adjusting the level of power applied, the torque can be determined. The actual torque will be lower than the theoretical value. Once the new rotary joint has gone through its running-in period, its rotation becomes smoother, and the torque decreases as well. 3. Observe the wear of the seal in the SMC joint: This step should be carried out in an environment with constant temperature, constant speed, and constant pressure. By changing one of these parameters and then observing and recording any changes in wear, several sets of data can be collected for comprehensive analysis. Of course, the wear of the seal is closely related to the structure, materials, and sealing method used. Engineer Peng from EMY (Wuhan) System Engineering Co., Ltd.: Phone: 027-87263542; Mobile: 18372021864; QQ: 1763639853. Address: 18A1, Building C, China Construction Plaza, Wuchang District, Wuhan. Email: sales@whaimuyi.com. Original source: http://www.08amy.com/News/252.html