Thread Content
The Changhui SWP-T16 data collector can accept 16 input signals of the same type or different types, and carries out the entire process of signal acquisition and data transmission according to the user’s settings. The SWP-T16 data collector is equipped with a serial communication interface, which allows it to form a multi-channel inspection device together with the SWP-ASR-MD main unit. It can also transmit data to a higher-level computer, thereby creating a multi-input circuit detection system that enables centralized management of recorded data. Common models of the SWP-T16 data collector: SWP-T16-80-23-N (universal signal input + RS485 communication), SWP-T16-80-08-N (Pt100 signal input + RS485 communication), SWP-T16-80-09-N (Pt100.1 signal input + RS232 communication), SWP-T16-80-03-N (K-type thermocouple input + RS232 communication), SWP-T16-20-23-N (universal signal input + RS232 communication), SWP-T16-20-08-N (Pt100 signal input + RS232 communication), SWP-T16-20-09-N (Pt100.1 signal input + RS485 communication), SWP-T16-20-03-N (K-type thermocouple input + RS485 communication). http://yunrun.com.cn/upload/202007/05/202007050052392149.png Key features: Universal signal input – 17 different signal types can be switched between. Input signal types: thermocouples, thermal resistors, 0-5V, 1-5V, 0-10mA, and 4-20mA. Operating environment: ambient temperature range of 0-45℃ ； Relative humidity ≤ 85% RH (to avoid highly corrosive gases). Power supply voltage: AC220V/50Hz. (The SWP-T16 data collector does not have a power switch; it starts operating as soon as it is powered on.) Power consumption: ≤ 5W. Display method: Displayed on the SWP-ASR-MD multi-channel inspection unit or via the host computer software. Parameter setting: The SWP-T16 data collector’s parameters are set using the SWP-ASR-MD multi-channel inspection unit or the host computer software. Communication baud rate: Fixed at 9600bps. Instrument dimensions: 175×315 mm (for wall-mounted installation). http://yunrun.com.cn/upload/202007/05/202007050035009943.png – Appearance of the SWP-T16 data collector. http://yunrun.com.cn/upload/202007/05/202007050047047986.png – Wiring diagram of the SWP-T16 data collector. http://yunrun.com.cn/upload/202007/05/202007050036384303.png – Selection table for the SWP-T16 data collector. SWP-T16-①②-③-④: ① Code, Communication method: 2 RS232, 3 RS485. ② Code, Transmitter output: 0 means no transmitter output by default. ③ Code, Type of input signal: 23 means universal input (17 different signals can be selected for each input channel). ④ Code, Other functions: N means no other functions. For information on how to use the SWP-T16 data collector, it is recommended to read the technical article “How to Use the SWP-T16-80-23-N Data Collector”.