Thread Content
Common types of magnetic flap level gauges include side-mounted magnetic flap level gauges and top-mounted magnetic flap level gauges. So, what are the features of side-mounted magnetic flap level gauges, and what considerations should be taken into account when using them? http://www.jiweimeter.com/uploads/image/20191216/1576493768.jpg I. Features of the side-mounted magnetic flap level gauge 1. Simple structure, robust and reliable, with no need for special maintenance. 2. It directly displays the liquid level, unaffected by the high temperature, fluidity, flammability, or toxicity of the liquid being measured. 3. The flap mechanism does not require power; it can display level changes and trigger alarms even without being disconnected. 4. It can be used in vacuum, high-pressure, and high-temperature environments, and is also suitable for liquids with low density. 5. It has strong corrosion resistance and is suitable for most corrosive liquids. II. Key usage points for side-mounted magnetic flap level gauges 1. It is advisable to install a stop valve in each of the connection pipes between the side-mounted level gauge and the upper and lower liquid separation sections of the container being measured, in order to open or close the level gauge ； On the other hand, it facilitates the maintenance of the level gauge. When the upper and lower stop valves are closed, the drain flange at the bottom of the level gauge can be opened or the drain screw can be removed, and clean water can be poured in to clean the main body of the level gauge. 2. When installing the level gauge, the verticality of the flange centerline should be ≤4‰. If the measurement range of the level gauge exceeds 3 meters, it is necessary to consider adding intermediate reinforcing flanges (or brackets) as fixed supports to enhance strength. 3. A connection cable should be used to link the remote liquid level transmitter with the secondary instruments, and the cross-sectional area of the core wire of this cable must be greater than 0.8 mm. When laid in parallel with the AC power supply, a distance of at least 20 centimeters should be maintained; it is preferable to lay it in a separate iron tube or use a shielded two-core cable, with the shielding layer being grounded at only one end. 4. Use a level controller whose contacts are designed for resistive loads; if non-resistive or high-power loads are used, an intermediate relay must be employed for conversion. 5. This level gauge is not suitable for use in liquid media containing magnetic substances suspended within them, as such impurities can cause jamming in the float assembly. 6. The blind spots in the external structure are related to the medium density. Therefore, different media have different blind zones. The above is the introduction to the \"features and usage guidelines of side-mounted magnetic flap level gauges\". If you wish to learn more about various level measurement instruments such as level switches (material level switches, liquid level switches) and level gauges (material level gauges, liquid level gauges), feel free to follow the WeChat official account: Jiweimeter. (Information sourced from: http://www.jiweimeter.com/baikeshow-88-1135-1.html; please cite the source when reproducing it.) ）