Thread Content
Turbine flowmeters are now widely used in various industries. However, we know that the measurement of flow rate by these instruments has certain requirements regarding the environment; failing to pay attention to these requirements can pose risks to our workers. Therefore, let’s take a look at the installation considerations for turbine flowmeters, as follows: 1. It is necessary to carefully select the location where the turbine flowmeter will be installed, taking into account the environmental factors at that site. Since it is an electrical device, it must be installed away from devices with high voltage, devices with high frequencies, etc., to avoid unnecessary magnetic field hazards that could pose a risk to people. It also cannot be placed in areas or environments with strong acids or bases, to prevent damage to the equipment and resulting electrical leaks; the location for installation should be large and open, allowing easy access for personnel to monitor the progress of operations. 2. Since the straight pipe section required for installing the flow meter has certain length requirements, it is essential to carry out proper preparations before installation to ensure that the length of this straight pipe section meets the specifications of the turbine flow meter. 3. The installation point of the turbine flowmeter must be concentric with the pipes above and below it, with the error kept as small as possible. 4. Vibration-reducing measures should be applied to the straight pipeline where the flow meter is installed. Flow meters* should not be installed on pipes with high vibration, especially horizontal vibration. If it is not possible to find a place for installation, it is recommended to use devices to reduce vibrations, and vibration-damping pads can also be installed on it. 5. Carefully select the pressure points and temperature points for the device. To meet the measurement requirements, staff must be located near the flow meter in order to measure the pressure and temperature of the pipeline, with their position determined according to specific requirements. For more information, please visit the company’s official website at http://www.yb1518.com/. Please retain this link when reproducing the content! http://www.yb1518.com/UploadFiles/20101111113351160.jpg