Thread Content
Keywords of this article: Rosemount 3051 http://china-rosemount.cn/ The Rosemount 3051H high-temperature pressure transmitter is primarily used in situations where the temperature of the medium is relatively high. With ordinary pressure transmitters such as the 3051CD and 3051TG, the medium temperature should not exceed 80 degrees when measuring pressure, while in low-temperature conditions it should not go below -40 degrees. As a side note at this point, when the temperature of the medium is below 40 degrees, don’t all liquids solidify? However, Rosemount transmitters are not used only for measuring liquids; they can also be used for gases. For example, the temperature of steam can be very high, while the temperature of some gases is extremely low. Pipelines can withstand high or low temperatures, but if the transmitter cannot tolerate such temperatures, the consequences are obvious. What is the maximum temperature that the Rosemount 3051H high-temperature pressure transmitter can handle? In the technical documentation, we found that the high-temperature pressure transmitter can withstand temperatures ranging from -40 to 240 degrees. If the medium is water, then it’s obvious that the water has been turned into steam. In many boilers, transmitters are used at both the inlet and outlet. At the top of the boiler, gases are the main output, and it is quite common for these gases to have temperatures exceeding 200 degrees. If the temperature goes above the range that the 3051 high-temperature transmitter can handle, then condensation equipment is necessary to deal with this situation. Of course, many experienced technicians have their own methods for handling such situations. We won’t go into too much explanation here. Shanghai Mengyan Automation Equipment Co., Ltd. Address: Room 1119, Jiahong Building, No. 639 Guangfulin Road, Songjiang, Shanghai. Contact person: Xu Gong. Mobile phones: 18616582302 / 18616582330. QQ: 764861476. Email: sales@shmyzdh.com