Thread Content
I. Introduction to the coating: This product is made primarily from molybdenum disulfide, combined with high-efficiency curing agents and film-forming additives. It boasts excellent high-temperature resistance, wear resistance, lubricity, and high adhesion. It can be applied to the surfaces of metal and non-metal substrates, and the coating provides properties such as heat resistance, wear resistance, lubricity, and the ability to self-repair minor defects. It is widely used in various industrial fields that require the implementation of the aforementioned functions. Once it cures into a film, this product is safe and non-toxic, and contains no heavy metals. II. Characteristics of the membrane layer 1. Basic properties: It possesses lubricating, wear-resistant, extreme pressure-resistant, and anti-corrosion properties ； 2. Good adhesion: Grade 1 can be achieved on metal substrates ； 3. Good re-coating property: The painted film can be recoated after appropriate treatment ； 4. Curing conditions: Heat curing ； 5. Theoretical temperature resistance: 400℃ ； 6. Repair function: It has an excellent ability to repair minor pits and imperfections on the surface of the substrate ； III. Applications: Suitable for application to the surfaces of substrates such as iron, cast iron, aluminum, copper, stainless steel, and rust-resistant iron. IV. Usage Method 1: Ensure that the surface of the workpiece is clean, dry, free from oil and dust ； 2. If used on a metal surface, the metal surface must be sandblasted (with 60–100# sand) ； 3. Before use, the coating must be stirred or shaken thoroughly; it can be adjusted to the appropriate viscosity using a special thinner ； 4. Before spraying or brushing, preheat the workpiece to around 50 degrees and maintain that temperature for 10 minutes before proceeding with spraying ； 4. Curing method: Allow to dry at room temperature after spraying, or bake at 60 degrees for 10 minutes, then heat to 120°C and cure for 30 minutes ； 5. Do not apply too thick a layer at once. When a certain thickness is required, wait until the first coat is completely dry before applying the second coat; subsequent coats can be applied in the same manner ； 6. The uncured coating does not possess the described properties. The coating on the workpiece surface must be cooled before it can be used ； 7. It is necessary to pay attention to safety during use and avoid contact with eyes and skin ； 8. The viscosity of the coating is adjusted according to the technical requirements of the process, and our specialized thinners are used. V. Packaging, Storage, and Shelf Life 1. Packaging: 5kg ； 2. Store in a well-ventilated and cool place; keep away from acids, alkalis, and salts. Avoid high temperatures, as well as exposure to sunlight and rain. Transport it as a hazardous material ； 3. Validity period: 180 days (25°C).