What anti-corrosion measures are taken on the inner surface of the power station condenser using sea water medium?
Thread Content
What anti-corrosion measures are taken on the inner surface of the power station condenser using sea water medium? Which one is most commonly used?
Corrosion inhibitor, sacrificial anode, Ni-P alloy plating
What kind of structure is it? What are the requirements?
Apply coating directly. Others are unreliable!
At present, most of the methods used are rubber lining.
Is there a more advanced method? Just give me some direction.
Corrosion inhibitor coating, brush coating, Ni-P alloy plating, etc. can be used, with varying effects.
It's not clear. You have to explain it clearly before anyone can help you.
If the metal material has been determined, it is better to apply anti-corrosion coating.
The paint doesn't work, it doesn't last. (1) Clean the inner surface of the used condenser chemically first, and use hydrochloric acid with caution. (2) The best solution for chemical coating treatment. An auxiliary measure is that if there is a metal such as CS in the pipe box, the sacrificial anode block (CP) must be repaired and welded for protection. . . . .