HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Inspection content and process of eja intelligent differential pressure transmitter

2022-06-28 View Original

Thread Content

This article is reproduced from: http://www.shqyyb.com/news/8921.html Keywords of this article: eja http://www.shqyyb.com/ Inspection content of eja intelligent differential pressure transmitter: The operator should be proficient in installing the differential pressure transmitter, correctly install the circuit and gas line of the differential pressure transmitter, accurately operate the three-valve group, and use a handheld communicator to set and configure the relevant parameters of the differential pressure transmitter. The calibration process of eja intelligent differential pressure transmitter is as follows: 1. Check the equipment and inventory the tools needed. 2. Install the transmitter and connect the circuit and gas circuit. 3. Correctly connect the handheld communicator and complete parameter setting and configuration. 4. Operate the three-valve group correctly. 5. Record the adjustment data, complete corresponding processing and calculations, and complete accuracy verification. 6. Set the reset flag. When adjusting the eja energy differential pressure transmitter, the staff must use a handheld communicator to set and configure the relevant parameters for the adjustment of the differential pressure transmitter, such as: Data such as bit number, unit and range. Different models of differential pressure transmitters use different protocols for calibration. Workers should reasonably select the corresponding handheld device based on the protocol used. For example, when selecting a differential pressure transmitter, you need to select an appropriate handheld communicator according to the transmitter calibration communication protocol. If you choose to use the Hart communication protocol during use, its frequency should be 1.2KHz ; If it is the Brain communication protocol, its frequency should be 2.4KHz. There is no compatibility between these two protocols. Shanghai Quanyun Instrument Co., Ltd. contact number: 021-57629782 Company Fax: 021-57629781 Mobile number: 15801876667 Contact: Bao QQ: 1609345838 address: Room 519, No. 32, Xinxin Road, Chedun Town, Songjiang District, Shanghai

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Quick Links