For portable dew point meters, an appropriate flow rate must be selected during dew point measurement

Thread Content

This article is reposted from: http://www.shqyyb.cn/News/152.html Keywords of this article: Portable dew point meter. http://www.shqyyb.cn/ A portable dew point meter is an instrument primarily used to measure the dew point temperature, and it boasts relatively high measurement accuracy. Therefore, when using a portable dew point meter, it’s important to know in which environments its use is most appropriate. When measuring the medium using a portable dew point meter, the temperature of the gas being measured is usually room temperature. Therefore, when the gas flow passes through the dew point chamber, it affects the heat and mass transfer processes within the system. Given other conditions remain constant, increasing the flow velocity facilitates mass transfer between the gas stream and the mirror surface. For instance, when performing low-dew-point measurements, the flow rate should be appropriately increased to accelerate the formation of the dew layer; however, the flow rate must not be too high, as this could lead to overheating issues. This is particularly evident in thermoelectric dew point meters with relatively low cooling power. Too high a flow rate can also cause the pressure in the dew point chamber to decrease, and this change in flow rate in turn affects the thermal equilibrium of the system. Therefore, it is necessary to select an appropriate flow rate in dew point measurements; the choice of flow rate should depend on the refrigeration method and the structure of the dew point chamber. The typical flow rate range is between 0.4 and 0.7 L·min⁻¹. It is advisable to perform a pre-cooling treatment before the gas to be measured enters the dew point chamber, which can reduce the effects of heat transfer. Above, the editor briefly explained that when using a portable dew point meter to measure a medium, it is necessary to take into account the room temperature of that medium as well as the flow rate during measurement. If you have any other ideas, feel free to leave a message. Shanghai Quanyun Instrument Co., Ltd.
Contact phone: 021-57629782
Fax: 021-57629781
Mobile number: 15801876667
Contact person: Bao
QQ: 1609345838
Address: Room 519, No. 32 Xinxin Road, Chendun Town, Songjiang District, Shanghai