Thread Content
This post was last edited by shll123 on 2022-7-25 at 16:01. The article is sourced from: http://www.shllzdh.cn/information/916.html. Keywords of this article: ultrasonic flow meter. There are several different types of ultrasonic flow meters; in this article, the editor will focus on introducing the externally mounted type. Different types have different installation environments, so in what kinds of environments is the surface-mounted type suitable for installation? As follows. Requirements for the installation environment of external ultrasonic flowmeters: 1. The pipeline to be measured must be filled with liquid. 2. Sufficient space is required to facilitate the installation and operation of the ultrasonic flow meter sensor. 3. On horizontal pipelines under inspection, sensors should not be installed at the top or bottom of the pipeline, and should avoid areas with irregular surfaces or welds on the pipeline. 4. The pipe has good roundness, a smooth inner surface, and uniform wall thickness. 5. Straight pipe sections of 5D on the upstream side and over 3D on the downstream side. The above has introduced the environmental requirements for installing ultrasonic flowmeters; otherwise, in some complex environments, the data measured by the flowmeter may be inaccurate, and other auxiliary tools will be needed to help resolve this issue. If you have any other thoughts after reading this information, feel free to leave a comment. Contact person at Shanghai Lingli Automation Technology Co., Ltd.: Engineer Qian. Mobile phone: 15000674198. Telephone: 021-67660051. Fax: 021-67660052. QQ: 2240882290. Corporate email: shlingli@shllzdh.com. Address: Room 808, Building 1, No. 4 Zhenxing Street, Zhuqiao Town, Pudong New Area, Shanghai