Analysis of electric float faults

2009-02-03View Original

Thread Content

1. Compare with the on-site glass level gauge to determine whether it is a float fault. 2. Check whether there is any blockage in the upper and lower liquid guide pipelines. Be careful when discharging toxic materials. 3. Check whether the float has wall-scraping phenomena. 4. Check whether the float is disengaged from the torsion tube. 5. Re-calibrate. In short, the cause of the fault must be analyzed based on the actual conditions on site, and it should be addressed following the principle of starting with the easier tasks before moving on to the more difficult ones.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Analysis of electric float faults

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links