What does the reciprocating compressor model 2D16 mean?
Thread Content
What does the reciprocating compressor model 2D16 mean?
2: Serial number, representing 2 columns; D: Structural type, representing type D; 16: Piston force, representing 16 tons
2 refers to the number of compressor columns, which is two; D denotes the arrangement pattern of the compressors, which is symmetric; 16 represents the piston force in tons
2: Refers to the number of columns of compressor cylinders, which is two. D: Indicates the arrangement pattern of the compressor cylinders, namely symmetric and balanced type. 16: Refers to the piston force in tons; there should be additional numbers after this value, in the format of X/XX, representing the inlet pressure at stage 1 and the outlet pressure at the end: handshake
Similar to the following: D–100/7 type air compressor, reciprocating piston type with symmetric balance; nominal volumetric flow rate of 100 m3/min, and nominal exhaust gauge pressure of 7×105 Pa.
2 columns, opposed configuration, piston thrust of 16 tons