Chemical product crushing equipment
Thread Content
May I ask everyone, what model of product crusher do you use in actual production? Which brand is of better quality? Thank you
Search on Baidu – there are many results. This product is quite well-made in China
Lz’s question is too vague! The selection of a crusher is very specific. The selection mainly depends on 1 the original properties of the material (particle size, viscosity, etc.), 2 the desired final particle size, 3 the viscosity during the crushing process, 4 the dust level, 5 hardness, 6 corrosivity, 7 impurity requirements, 8 throughput........
The model and type of crusher should be chosen in consideration of the actual characteristics of your product
We produce copper oxide in a separated form; the wet material resulting from the washing and filtration of copper oxide is dried, and then the dried material is crushed. The dried copper oxide takes on a pellet-like shape, similar to wet flour that has been dried and then crushed into powder. Requirements: 1. No impurities allowed; 2. Fineness must reach 150 mesh
Choose the type based on the properties of your material! According to the required particle size specification! Of course, you need to sieve it after crushing it! The same! Just check it out! Many!
It is generally classified based on the desired degree of particle size reduction: for particle sizes of 10 mesh or less, a coarse crusher can be used, as this is usually favorable for the subsequent drying process； For 10–120 mesh, a universal grinder can be used, which can be equipped with a dust collection box. For particle sizes of 120 mesh and above, ultra-fine powder can be used; for sizes ranging from 500 to 3000 mesh, an air jet mill can be employed. Hey, I’m a manufacturer of equipment for crushing, mixing, and drying. I can’t say it’s the best; whether the equipment is good or not needs to be seen by you, or it becomes apparent only during use. yxr1218@sina.com 13506111605 Yang
It should also be noted that when selecting equipment, it is important to choose based on the properties of the materials; in particular, for flammable and explosive materials, measures to prevent fire and explosion must be taken.