Has anyone done a simulation of steam heating liquid using aspen?
Thread Content
Knowing the steam parameters and the heated liquid parameters, find the steam consumption! (Both indirect heating and direct heating) Thank you!
Is it used on the heat exchanger? If it is, it is not difficult. Just do a design optimization in aspen. If it is not a heat exchanger (referring to tubes and the like), it is not easy to forget it. Just do it according to the principles of chemical engineering.
Heat exchangers for indirect heating and flash tanks or mixers for direct heating can all be specified in the design.
Thank you! For example, use the heat exchanger (heatx) model in aspen plus to heat 50c water to 120c with 158c saturated steam, and the saturated steam is condensed into 158c water. I want to get the amount of saturated steam. If I don’t input the material flow of steam, I can’t run the simulation! How to make design regulations? Thanks, it would be better if you could give me an example! Thank you very much
Enter the material flow of steam and you will know after a few tries.
First assume a minimum, and then use the "Design Requirements" option to limit the export logistics.
Thank you all! Studying * ing!